Today, the use of energy-dissipating system such as yielding metal damper in structures can improve the seismic performance of structures. One of the characteristics of metal yielding dampers is the ability to dissipate high energy and increase the ductility of the structural system, which can improve the ductility and energy absorption characteristics of the metal frame equipped with braces and prevent the brace from buckling during an earthquake. The purpose of this research is introduce a new form of yielding dampers called honeycomb yielding damper (HYD) with different dimensions and thickness along with evaluating and comparing the force-displacement diagrams and investigating the seismic parameters of this type of yielding damper. All modeling and validation of numerical samples were done by Ansys software. Non-linear analysis method is used in this research. The hysteresis curves are obtained under in-plane cyclic loads. The mechanical parameters such as ductility ratio, initial hardness, effective hardness and damping coefficient can be determin. The results of this research showed that the effective stiffness increases by increasing the length and thickness of the sample. The ductility ratio decreases by increasing the height of the sample. the effective stiffness decreases by increasing the height of the sample. The ductility ratio increases by increasing the height of the sample. Also, the effective damping coefficient decreases with the increase in the height of the samples, the effective damping coefficient increases with the increase in length and thickness of the samples.

Connections play a crucial role in structures, including steel structures, and have a significant impact on the seismic behavior of the structure. One particular type of connection commonly used in steel structures is the Reduced Beam Section (RBS). This connection reduces the moment strength of the beam near the column, which in turn results in less moment being transferred to the column at the final moment. The study involved 30 numerical analyses conducted using ABAQUS to examine two cases. The first case involved investigating a connection with a beam that had a hole in the flange area. The variables examined included the area of the flange holes and the axial force of the column. In the second case, a yield ring was utilized in the flange area of the beam. The radius of the yield ring was considered as a variable insix different cases. Equations for calculating the maximum strength moment and analyzing the linear region of a beam were presented in the study. The yielding damper must yield earlier than other members, and an equation was provided to ensure that it does. Finally, the cyclic behavior of the two models was also compared. Numerical analysis revealed that if the area of the flange holes is half that of the beam flanges, the beam's strength does not significantly decrease withincreasing axial force. The elastic stiffness and ductility of the SRD-equipped connection were higher than the RBS model, with the SRD model achieving 1.8 and 2.6 times greater ductility and elastic stiffness, respectively, in the most optimal state.

The concrete structures exposed to the earthquake have the potential of cracking and reduction in stiffness and strength. Because of their low deformability, there would be some cracking and plastic hinging in the moment-resisting frame. The utilization of dampers is a solution to improve the behavior of the constructed structures. dampers play a crucial role in improving structural performance level and bearing capacity. In the present study, 9 concrete frames were tested, and steel yield dampers have been used for the seismic rehabilitation of the concrete moment-resisting frames. The yield dampers elements are ADAS dampers (Added Damping and Stiffness) connected to the concrete frame using steel braces. The concentric-type steel braces connect the dampers and concrete beams. Furthermore, to investigate the influence of the braces on the structure’, s strength and behavior three concentrated braces have been installed in the structure. The structure in which ADAS dampers was employed demonstrated more strength and less recorded damages than the simple moment-resisting frame. In the present study, the effect of braces and dampers have been investigated in the behavior of the structure, cracking, and strength. The strength of the frames was increased by 48% and 21% by employing steel braces and yield dampers in the concrete frames, respectively, comparing the control frame.

The present article seek to investigate the function of elliptical steel damper function in steel frames seismic resisting. The elliptical damper is a kind of earthquake energy dissipater in structure which acts based on the steel yielding feature. Thus, this damper in frame lateral displacement mechanism is expected to have a satisfying hysteretic behavior in terms of energy absorption is on acceptable level. To study the EADAS (elliptical added damping and stiffness) elliptical damper function Abaqus software was used in seismic resisting of steel frames. To do the analysis one span- one floor which was modeled with eight kinds of suggested damper was used. The basis of the analysis method is based on the finite element method and a cyclic loading curve was used and the frame will be pushed to the failure of the dampers. The results of the present study indicates that through the addition of this damper with the damage focus in damper the structure elements remain in elastic zone and without any damage bear the lateral load. The damper causes an increase in ductility and the frame energy absorption hysteretic and it can be used for seismic resisting of steel frames.

Concentric bracing systems are a popular solution for strengthening moment frames due to their high lateral stiffness, ease of installation, and low cost. However, buckling in compression members can result in sudden loss of strength and less deformability. Researchers have suggested using steel slit dampers to increase deformability and energy dissipation in this system by directing damage away from bracing members. In this study, 265 finite element models were analyzed in ABAQUS software based on previous experimental investigations and the installation configuration of the combined elliptical slit elements with Chevron bracing system in a moment frame. The effects of varying each geometric parameter of the element, including thickness, width, height, and number of slits, as well as the minor diameter of the elliptical slit, on the behavioral characteristics have been investigated in a three-dimensional parametric space. These characteristics are such as elastic stiffness, ductility, force capacity, and cyclic energy dissipation. Finally, and based on conducted numerical analysis, suitable ranges for each geometric parameter have been proposed to facilitate optimal design of the element.

Over years, the energy absorption process against different kinds of loading has always been one the most important issues in the engineering science. To address this, many kinds of dampers such as viscoelastic, friction, yielding, mass, and liquid dampers have been invented. Among all these dampers, steel yielding dampers are one of the most economic, available, suitable, and best choices for the long return period of seismic cyclic loading on structures. However, it seems that there are not sufficient studies on these dampers to convince the designers to use them widely. This research tries to show the effects of geometrical parameters on the energy absorption and cyclic behavior on a specific simple trapezoidal steel yielding damper using the finite element method, then the effect of using a new steel damper on base shear and roof acceleration responses of a three story building studied by nonlinear time history analysis. According to the results, there are some effective and less effective parameters whose variation such as geometrical parameters can seriously change the total energy absorption level and improve the damper hysteresis loops as well as ductility under specific cyclic loading and showed that using new steel damper will results the significant decreasing in base shear and roof acceleration of the building.